Triad Silver Series In-Room LCR Spkrs,Elan Amp,700 Watt 17" pwrd sub - $350 (cornwall)
Main Street near Hazen
condition: fair delivery available make / manufacturer: Triad, Elan model name / number: Silver
QR Code Link to This Post
Here is a pair of Triad home cinema speakers, (2) 6 1/2" woofers and (1) 1" tweeter per cab, 4 ohms, freq. resp. 80hz to 20Khz, 91 db sensitivity, 114 db peak output, Dimensions (W x H x D) 8 3/4 x 18 7/8 x 9 1/2"
(22.2 x 47.9 x 24.2 cm), weight 26 lbs. each. Metal grills. Black in color.
(1) Elan z660 6 chan per amp,
Line Inputs and Outputs Channel configuration of the Z•660 is a breeze. In addition to the six gold-plated RCA line level inputs, the Z•660 is equipped with six buffered RCA output jacks,making it easy to loop a source input to any of the other channels. The line outputs also have built-in series resistors, which allow you to "Y" the outputs together to create monaural listening areas or "sub-zones".The Z•660's BUS button can make things even easier. When using one source which you wish to send to three separate stereo listening areas or "zones", simply pressing the BUS button will automatically route the source input signal to all of the Z•660's speaker outputs. This "quick-connect" option completely eliminate the need for patch cords or jumpers.Independent Channel Level Adjustments an installer's delight! No longer will you have to remove the amp from a rack or cabinetry, or crawl behind the unit to "tweak" the sound. Six independent gain adjustments for each channel are located on the front of the Z•660. Simply pullback the front trim strip for easy access and tweak away! Infrared System Control The Z•660 makes whole house infrared control of your system a snap and also eliminates the need for "add-on" IR distribution boxes! Its built-in "Infrared pass through" feature allows you to power up to four IR receivers and connect upto four IR emitters for complete control of your source equipment via hand-held remote controls. LED Status Indicators Once again, ELAN has kept ease of installation and the installer in mind, providing visual feedback for virtually every operational aspect of the Z•660. Six banks for LEDs on the front panel indicate activity for each of the six amp channels. Ared "POWER" LED confirms that the amplifier is on, and a green "IR ACTIVITY"LED indicates pass-through of IR signals from the IR in-wall receivers to your source equipment. Channel Bridging How easy is it to turn two, four, or six 60 Watt channels into one, two or three 120Watt channels. Simply press a button! The recessed Channel Bridging buttons located on the back panel of the Z•660 make your custom channel configurations easy.Remote Audio Mute Many audio receivers and pre-amps have a remote "power up" output jack that sends a low voltage signal to other equipment to turn them on or off. The Z•660can utilize this signal to mute the audio outputs of the amplifier, essentially putting the Z•660 in "stand-by" mode. This feature eliminates any noise that may come through the speakers.
(1) 18" 750 Watt powered Subwoofer in black cabinet to match the home cinema speakers, with RCA inputs, Bass extension control, input level, low pass filter, and phase controls.
All this equipment is at or near audiophile quality. All in fair condition.
Do NOT contact this poster with unsolicited services or offers.