craigslist | tools in hudson valley

Colman Powermate ProGen 5000 Generator w/Wheel Kit (Wappingers Falls) $200

2009-11-07T18:46:32-05:00

This is a great household generator for homes under 2000 sf. or for larger homes that do not need to run everything when the power goes out.
Also great for the job site!
Generator is in great condition however, either the gas jelled up or I knocked off a wire when moving it. She turns over, but won't start. Had been sitting for 1 year prior to this and had been running when I put her away.

I am moving and don't have time to trouble shoot it. These sell used on Craigslist for $350-$375 all the time. $200 and its yours.

Torch with MC tank & Sheet Metal Sheers (Chester) $65

2009-11-07T18:32:39-05:00

Mc tank, regulator, hose & torch the torch is real nice it does not need a stricker to be lite just press a button $85.00 complete set .If you ever priced a tank you know its worth it. Keets (Black & Decker industrial line) Sheet metal sheers cut like new $65.00 Please inclued your phone # and best time to reach you in your email.

free hit counters

3.5hp High Performance Self-Priming Engine Driven Pump (Wappingers Falls) $200

2009-11-07T18:25:27-05:00

3.5 & 5.5 HP High Performance Self-Priming Engine Driven Pumps

Applications include pumping clear, clean water, salt water and some liquid fertilizers and herbicides.

Polypropylene construction with EPDM seal for use in agriculture, industrial and marine applications
Reliable Briggs & Stratton engine for long life
2� suction and discharge ports
Built-in check valve
1 year limited warranty
Pumps up to 140 GPM
Suction: 2"

Mechanics Chest and Tools (Chester, NY) $5000

2009-11-07T18:09:40-05:00

Professional Mechanics Chest FULL of professional tools. MAC, Craftsman, Snap On and many more brand names. Automotive testing and diagnostic devices too. You need it - its here. Too many to list. Everything a professional mechanic needs.

Please respond and see for yourself!

STAR Mud / Transfer Pump 3.5hp Gas Engine (Wappingers Falls) $100

2009-11-07T18:03:02-05:00

I am selling a new STAR 3.5hp Gas Engine Transfer/Mud pump.
Bought it for $300 two years ago in preperation for a job, but never needed it.
Asking $100...The 3.5hp Briggs Engine is worth that alone!

RIDGID 6.5 Amp VSR Drywall Screwdriver (ulster county) $65

2009-11-07T17:43:08-05:00

RIDGID 6.5 Amp VSR Drywall Screwdriver. -New in box. it sells at home depot for 89.00 i bought the 2 pack promotion sale for 119.00 plus tax and only used one of them. sell for 65.00 -Adjustable nose piece to set consistent driving depth
-Belt clip for quick storage and transport
-6.5 amp motor with hardened steel gears for tool longevity

3" Pump intake hose 22" long for mudsucker (Monticello) $75

2009-11-07T16:27:30-05:00

Sold the pumps and no longer need this

cage is a little dented and there are 2 dents in the hose but it still threads on and works great no leaks

Hose is 22 foot long

Price is firm! Price it out new , and you will see why

Black & Decker Drill, Sawzall & Vac (Putnam County, NY) $130

2009-11-07T15:04:26-05:00

18 V set all are in great working condition, nothing wrong with them, just upgraded to a new set of tools and want to pass these on to someone who will get use out of them. All are Black & Decker Firestorm model, 18v - set includes Drill, Reciprocating Saw, Handi Vac with attachments, 3 batteries, two chargers and a storage bag. I still have the manuals for the Drill and Vaccum, but not the saw. Selling as a set only, please no requests for seperate pieces. $130 or best offer.

red tool chest $150

2009-11-07T14:50:38-05:00

Red tool chest top and bottem few dents in unit huskey upper chest $50 have tools too. can take everything for 200 or obo ?

emglo gas twin tank compressor (pine bush,ny) $400

2009-11-07T14:34:56-05:00

for sale is an emglo gas powered compressor. twin tank with honda engine. 2 years old. price when new was $800
runs great . excellent for roofing , can run 3 roofing guns at a time with no problem. good compressor for any contractor.
the price is $400 firm cash only. you can call me at 845-524-4138 ask for dan or you can email at danyoung32@gmail.com
located in pine bush,ny. thank you

Plumbing Tools (Poughkeepsie-Town) $75

2009-11-07T13:32:06-05:00

Misc. professional plumbing tools, featuring Ridgid cast iron snapper and wrenches. No off brands.

Jacobsen Heavy Duty Snowblower (Dutchess) $120

2009-11-07T13:09:04-05:00

Used Jacobsen Snowblower, 26" wide cut 2 stage heavy duty snowblower, I have 2 snowblowers and I figured that I would sell this one because it is bigger and throws a lot further. Removed it from my shed and within 3 pulls the engine was running again. The engine is also set up with the ability to install an electric starter, but I do not have that. One small issue is that it needs a new petcock, the one that is there works but drips gas when fully open, I have run it that way.

Roofing Tools - Brackets (Washingtonville, NY)

2009-11-07T12:50:57-05:00

Roofing Tools - Best Offer

Picture one - 3 quantity
Picture two - has one showing but I have 7 of them

If interested please call 845-913-5490

Thanks!!!

Sears 25cc 2-cycle Leaf Blower & NEW Carburetor (Rockland County) $30

2009-11-07T12:21:17-05:00

You�re looking at a Sears 25cc 2-cycle Leaf Blower.

This leaf blower is BROKEN and no longer runs. I purchased a new Carburetor in an attempt to repair the blower, but I could not repair it. I paid $40.00 for the Carburetor in the spring.

Asking $30.00 for both the Carburetor and the broken leaf blower.

LASER (PO'K.) $1000

2009-11-07T10:32:44-05:00

SPECTRA LL 300 LASER---BRAN NEW--NEVER USED IN THE CASE---COMES WITH THE UPGRADED CR-600 RECEIVER,ROD-MOUNT-MAGNET MOUNT FOR YOUR DIGGER,TRIPOD,ROD,MANUAL-------WAYNE----914-464-1882-----NO SOLICITORS OF ANY KIND----$1000 FIRM--CASH ONLY

out of business sale (northern dutchess county)

2009-11-07T10:04:55-05:00

all used garage equipment-all in good shape used daily-inspection machine-wall mount strut tool-special audi tools-pump handle and hose for a quick oil change-oil drain-2-steel work benches-wall unit air-cond.--copy machine-fax machine-3-credit card terminals-cash register-battery pack-battery charger-acetalyne handle and gauges with hoses-small cooking grille for a counter 110 volt[used for making egg sandwitches hot dogs hamburgers-4-draw filing cabinet-8ft. ladder-2-small jack stands-bulb cabinet-exhaust stand adjustable-914-466-0896

Matco 3 PC PALM RATCHET DRIVER SET (Suffern ny 10901) $35

2009-11-07T09:25:02-05:00

Brand New Ergonomic Handles for maximum speed and torque, Forward and Reverse function Kit includes 1/4, 3/8, and 1/2 inch drive, Packaged in blow molded case

Little Wonder Fan ,Meyer/ Western,Echo PB400 Coils ,Sthil TS 400 Parts (Suffern ny 10901) $1

2009-11-07T09:23:31-05:00

Little Wonder 13 HP Blower Fan Blade Part # 910230 Brand New $70 also might fit other little wonder push blowers

Western plow lights with wiring $75 for 2 of them

Meyer Snow Plow Light Adapter Harness Kit Part # 07102 brand new $20

Brand New Echo PB400/410 ignition module and ignition coil $40

Sthil TS400 Demo Saw Parts and a Brand New Air Filter Kit

Brand New 14" Diamond blade for all demo saws $40

Brand New Echo Dual Feed Weedwacker Head $15

Used Echo Single Feed Weedwacker Head $5

Black & Decker GS700 Cordless Grass Shear trimmer $10

Brand New SP-40 Interstate Lawn and Garden Battery strongest battery you can buy $25

Brand New ATD pistol grip grease gun in sealed box with 1 tube of grease $15

AMMCO BRAKE LATHE (Catskill, NY) $2450

2009-11-07T09:17:52-05:00

This Lathe Is Completely Refurbished And In Like New Condition
Comes with Most Standard Adapters And Silencer Bands. Chip Tray / Catcher Inlcuded
WORKS GREAT - READY TO MAKE YOU MONEY
Specifications
Model 4000 Original Cast Iron Machine Nice And Heavy For Rotors And Drums
Max Rotor Diameter 14.5" *
Max Rotor Face Width 3.75"
Max Rotor Thickness 1.875"
Max Arbor Capacity
A: Standard
B: Heavy Duty
(B is optional) A. 100 lbs.
B. 200 lbs.
Spindle Speed 100, 200 RPM
Drum Feed Rate .002" to
.020"/REV
Rotor Feed Rate .002"/.010"/REV
Drum Depth Up to 6.875"

Key Features
Twin cutter tools and quick drum-to-rotor changeover.
Adjustable spindle speeds (if desired) allow for quick rough cut/finish cut ettings.
Infinitely adjustable spindle-feed gear box.
User-friendly ergonomics.
Supports drums or rotors up to 100 lbs. using the standard one inch (25.4mm) arbor.
Used for passenger cars and light trucks up to 1 ton.

Pick Up Only

Please call John
1-518-622-3523

CORDLESS MILWAUKEE SCREW GUN (TIVOLI) $30

2009-11-07T07:43:09-05:00

MILWAUKEE HEAVY-DUTY CORDLESS 3/8 ''DRIVER/DRILL 9.6 volt

$30.00

DRILL IS OLDER BUT WORK GOOD .

BOTH BATT ARE GOOD

CRAFTSMAN LASER (TIVOLI) $20

2009-11-07T07:39:32-05:00

CRAFTMAN

4 IN 1 LEVEL

WITH LASER TRAC

MODEL NO. 320.4824

20.00 O.B.O.

3 beam laser (tivoli) $20

2009-11-07T07:35:24-05:00

MP3 LASER MARK

3 BEAM SELF LEVELING LASER

ONE OF THE THREE BEAMS ARE NOT WORKING

GOT LASER 7/12/08

FLOOR BUNISHER NEEDS BATTERIES (ROCKLAND) $350

2009-11-07T01:58:23-05:00

GOOD BURNISHER NEEDS BATTERIES REPLACED,MUST SELL MAKE OFFER!! SCOTT 914-837-2955

DUST COLLECTOR ALMOST NEW (ROCKLAND) $450

2009-11-07T01:54:23-05:00

JET COLLECTOR IN ALMOST NEW COND, GREAT FOR WOOD SHOP!! SCOTT 914-837-2955

Transit Tri Pod and Stick NEW (Hudson Valley) $60

2009-11-06T21:47:37-05:00

Cst Berger is the make

Gravity Fed Pnumatic Paint Gun (Poughquag NY) $50

2009-11-06T21:11:46-05:00

Im selling my gun in which Ive used to paint my cars. This is a green gun. The brand is farmhand, You can email my reply to adress, or text/call 914-844-0752

220v Stick Welder (Poughquag NY) $50

2009-11-06T21:09:47-05:00

I have a stick welder that I purchased but never used because my house does not have an oultet to plug it into. 50 dollars takes it, its brand new . text or call 914-844-0752 for info.

Stihl Demo saw (Spring Valley) $400

2009-11-06T20:57:50-05:00

This saw comes with 14" diamond blade & 2 metal cutting blades /Has water hookup
STIHL TS400 RUNS PERFECT!

Wood Lathe (Putnam Valley) $600

2009-11-06T20:31:43-05:00

Wood lathe, variable speed, Rockwell/Delta
Model 46-400 Serial # 1285726
115 volts � � horsepower
Swing over bed = 12�, swing over gap = 16�
Distance between centers = 36�, #2 morse taper
Tool rest for outboard turning
This is a very heavy duty machine, in excellent condition.
Any questions call 845-526-3041.

6' Sander (Wallkill) $5500

2009-11-06T20:13:47-05:00

For sale 6' Sander

Excellent Condition

Stainless Steel

Hydraulic

Sorry no pictures, if interested give Duane a call at 845-742-0733

Milwaukee Sawzalls NEW $150

2009-11-06T20:03:28-05:00

I have for sale a new (never been used )Milwaukee Heavy Duty Sawzalls Model#6507.
It has dual range trigger speed control with quik-lok cord and case.

Ridgid Chain Wrenches $150

2009-11-06T19:40:13-05:00

I have for sale Ridgid chain wrenches Model# C-36. Its only been used about 3 times.
Ridgid 31330 Features:
A double jaw gives fast, ratchet-like action in either direction.
The heavy-duty model has replaceable alloy steel jaws.
The light-duty model has a one-piece forged alloy steel handle and jaw.
Ideal for use in close quarters.
Ridgid 31330 Specifications:
Rated Pipe Capacity: 4-1/2"
Actual O.D. Capacity: 7-1/2"
Chain Length: 29"

16hp v-twin vanguard briggs&stratton engine (patterson,ny)

2009-11-06T19:19:30-05:00

16hp v-twin vanguard briggs&stratton engine 1" horizontal shaft just serviced runs good just needs exhaust make me an offer

scanners/enhanced monitor/analyzer (HV)

2009-11-06T19:06:12-05:00

matco tools diagnostices system up to 93 domestic pathfinder2 path finder1999 w/books ,snapon scanner mt2500 super deluxe gm,chy,ford 1989 trouble shooter ford 1981-90 prim cartridge gm 1980 1/2 - 90 prim cartridge plus othe analyzer cornwellfl-60 alltest 3707,mactool et985,atd 5542 steel man engine ear

kohler vtwin generator 8000 (saugerties ny)

2009-11-06T18:56:27-05:00

came out of camper with low miles,electric starts,nice,low hours needs some love to get going sat for 6 years,call 845 399 4303 my name is josh

campbell hausfeld 26 gallon air compress ( putnam valley ny) $100

2009-11-06T18:40:06-05:00

for sale is a 5hp 26 gallon 125 psi electric air compressor made by campbell hausfeld like new barely used $100

Dewalt Nailer/Stapler Never Used! (bloomingburg) $100

2009-11-06T16:57:18-05:00

Never been used Dewalt nailer stapler. Perfect condition. originally $152 special order from Lowes selling for $100 email for more information

Stanley Bostitch coiled nailer N66C (bloomingburg) $200

2009-11-06T16:56:19-05:00

Never been used Bostitch coiled nailer N66C originally $250 selling cheap for $200. STILL IN BOX Check bostitch website to compare price and further product summary:

http://www.bostitch.com/default.asp?TYPE=PRODUCT&CATEGORY=BOS_SPECIALTY_CONST_NAILER&PARTNUMBER=N66C

Bosch jigsaw 1587AVSK new in box!! CHEAP (bloomingburg) $115

2009-11-06T16:54:38-05:00

New in box Bosch 1587avsk jigsaw. never been used, selling cheap at $115 compare to prices at website below including further product description:

http://www0.shopping.com/xPO-Bosch_Bosch_1587AVSK_5_0_AMP_TOP_HANDLE_JIG_SAW_with_Case

Drywall Screw Gun (Chester) $20

2009-11-06T16:19:40-05:00

Black and Decker, heavy duty drywall screw gun. Very good condition.

Pipe Cutter (Chester) $15

2009-11-06T16:17:43-05:00

Rigid pipe cutter model no. 2, 1/8 in. to 2 in., good condition

Pipe Wrench (Chester) $15

2009-11-06T16:15:33-05:00

Rigid pipe wrench model no. 24, 1/2 inch to 21/2 inches.

MATCO CORNWELL TOOL CART (New Windsor) $350

2009-11-06T16:15:19-05:00

Cornwell Tool Cart, These cost about 600 new Must go quickly, it has ball bearing drawers, does not come with tools, it has a cover. and locks. 350 for quick sale. thanks.

Flex-O-Ladder (Blooming Grove) $60

2009-11-06T15:31:47-05:00

Approx 12 ft. 6 in. long---excellent condition---845-496-3683

Gearmotors (Hopewell) $5

2009-11-06T15:08:55-05:00

Kokusan Denki TCO 823
100 V 50/60 Hz - 115 V 50/60 Hz
2800/3400 RPM
2 Shafts 8 mm Dia. direct/32.5:1
New
$5- each

RIDGID JIG SAW CORDLESS 18 VOLTS (NANUET N.Y.) $75

2009-11-06T15:00:21-05:00

RIDGID CORDLESS JIG SAW 18 VOLTS-MODEL R843--IN MINT COND. TOOL ONLY NO BATTERY OR CHARGER---845 6644071 --LOOKS AND WORKING GREAT====75.00 FIRM==CASH AND PICP UP ONLY======THANK YOU..---

Laminate Trimmer (Chester) $50

2009-11-06T14:53:29-05:00

Black and Decker laminate trimmer No. 267, 5/8 h.p., 4 amp, 27,000 rpm with all guides and bit. Like new, never used.

NEW Trash/Transfer Pump 3.5hp Gas Engine w/Hoses (LaGrangeville) $200

2009-11-06T14:38:12-05:00

STAR Trash/Transfer Pump
3.5 hp Gas Engine
Includes Pick Up and Discharge Hose
New! Never Used

Garner Denver 1/2" Right Angle Air Ratchet (Monroe, NY 10950) $60

2009-11-06T14:03:53-05:00

I am selling a Garner Denver 1/2" Right Angle Air Ratchet. It is a size C 3, it operates @1200 rpm. It is twice the size of a normal air ratchet, so I'm think it may for heavy duty truck or construction equipment? It is is 18" long. It is good condition & is functional.
Sorry no pic.

$60.cash & carry only.
email CL to get my phone # or more info.

Excel Pressure Washer 2400 PSI Honda Engine (Congers, NY) $75

2009-11-06T11:24:14-05:00

Used Excel Pressure Washer 2400 psi, 5 horse power OHC Honda Engine. Runs good, no hoses, water pressure comes out of hole, but I don't no how much. Would like to get $75 firm.

companion generator (congers) $425

2009-11-06T11:22:40-05:00

For Sale used companion generator, like new. Would like to get $425 but will consider all reasonable offers. Call Joe at 845-268-3092

Location: congers
it's NOT ok to contact this poster with services or other commercial interests

Pressure Washer DeVilbiss 2400 PSI (Congers, NY) $200

2009-11-06T11:18:42-05:00

DeVilbiss 2400 PS Pressure Washer, 5.5 Honda Engine, 2.1 GPM, runs good. Would like to get $200 but will consider all reasonable offers.

JC Penney Generator (Congers, NY) $300

2009-11-06T11:15:49-05:00

Used JC Penney 3000 Watt Alternator, Three 120 Volt Grounded Outlets and One 240 Volt Grounded Outlet. Runs. Would like to get $300 but will consider all reasonable offers.

Bostich finish and Trim Combo (montgomery) $200

2009-11-06T10:52:09-05:00

bought this on sale for $300 at Lowe's last winter for my husband. never out of the box. great deal for you!!

amy
706-0229

firestorm black and deckers laser skillsaw like new (town of newburgh) $25

2009-11-06T10:34:06-05:00

black and decker fire storm laser like new 25.00 dremel set and attachments never used 30.00 845-787-5959

modis snap on scanner (kingston ny) $3000

2009-11-06T10:16:32-05:00

snap on modis scanner with ver 8.4 with all cables and cart like new auto repair shop going out of buss. many other tools also can call 845-338-1848 ask for joe

Craftsman 13 in planer (Kerhonkson NY) $250

2009-11-06T09:03:59-05:00

Craftsman 13 inch planer similar to what you find here http://www.sears.com/shc/s/p_10153_12605_00921748000P?keyword=planer . This was used only a few times and is like brand new. Call tony 845-399-5073

8 1/4 " SEARS TABLE SAW (CORNWALL) $20

2009-11-06T08:47:02-05:00

THIS SAW IS IN GOOD RUNNING CONDITION

NEEDS CROSS CUT GUIDE. HAS A RIP FENCE (NOT SHOWN HERE)

REPLY ONLY BY PHONE 845 926 8192

Salamander Space Heaters (orange county) $75

2009-11-06T08:27:18-05:00

Salamander heaters Red 150,000 btu propane Heats large area fast The red heater in the picture They sell for 259.00 and up $75.00

free hit counters

Poulan Pro Chain Saw 18" (New paltz) $50

2009-11-06T08:10:17-05:00

Poulan Pro Chain Saw 18" Bar with case. Was Running great and strong last year, then began to start hard this season. Will start and run but I think it needs carb work. Was Gonna take it apart but My wife bought me a brand new saw!! Call 845-392-3626

Hand Truck (New Paltz) $20

2009-11-06T07:47:10-05:00

Greay Metal hand Truck with Rubber tires - Call 845-392-3626

6 & 8 Foot Fiberglass step Ladders (Blooming Grove) $65

2009-11-05T22:17:00-05:00

Both for $65.00 good condition must sell know Call only this is not my computer Jody 845-776-0913

New Airless Spray Gun (Ct/Ny Border) $10

2009-11-05T21:38:53-05:00

This is a Electro Airless Spray Gun with original box and owners manual. It has never been used It is yours for $10.00. Located in Ridgefield, Ct

Tach/Dwell Bench Type Meter (CT /NY Border) $10

2009-11-05T21:38:21-05:00

This is a very nice unit that my Father used for years. It is complete with the owners manual. Would be great for those classic car repairs. $10.00 and its yours. Located in Ridgefield Ct.

Slighty used Tile Cutter (CT /NY Border) $20

2009-11-05T21:36:54-05:00

This is a slightly used tile cutter that will cut up to 16" ceramic tile. This would be a great addition to your wet saw tile jobs.It is your for $20.00. Located in Ridgefield, Ct

Tapco Siding Cut Table (High Falls NY) $325

2009-11-05T21:00:50-05:00

Awesome tool, fully adjustable to accommodate different saws.
Bench and guide legs not included

Knaack Job Box (High Falls NY) $350

2009-11-05T21:00:36-05:00

Kaack Box 30" deep 34" high on the inside 60" wide
with casters and locks
Partial opening front, one shelf

24' 225lb WERNER extension Ladder (Hopewell Junction) $100

2009-11-05T20:52:23-05:00

Used. That's not rust in the photo...it's just dirt that splashed up from rain. Aluminum doesn't rust

Needs a rope for pully....if you use that feature.

Comes with rubber stabelizer bumper end caps...see photo

Come with 100 in cash and take it away. Quick sale....it's gotta go!

24 ft. aluminum extension ladder
225 lbs load capacity
Slip resistant traction tread D-rungs for comfort
Type II Duty rating

Ladder Type: Extension
Ladder Material: Aluminum
Duty Rating (lbs.): 225.0
ANSI Ladder Rating: Type II
Ladder Length (Feet): 24.0
Base Width (Inches): 17.0
ANSI Safety Listing: Yes
OSHA Safety Listing: Yes
CSA Safety Listing: No
Telescoping: No
Rail Material: Aluminum
Rung/Step Material: Aluminum

Makita Impact Driver (Poughkeepsie) $175

2009-11-05T20:14:45-05:00

Up for sale is a brand new lithium ion powered Makita impact driver, battery, and charger. 175 or best offer.

Makita 18vt cordless compound miter saw and cordless hammer drill (poughkeepsie) $150

2009-11-05T20:08:36-05:00

CORDLESS SAW MODEL NUMBER LS711D
USED APROX. 10 TIMES

AND

18VT CORDLESS HAMMER DRILL MODEL NUMBER 8443D
HAS BEEN USED BUT STILL WORKS GREAT

ALSO INCLUDES HARD CASE,CHARGER ,
2 BATTERIES,DUST BAG, DRILL HANDLE

TRADE FOR ITEMS OF EQUAL VALUE

BAND SAW (MIDDLETOWN) $40

2009-11-05T19:28:41-05:00

THIS BAND SAW CAN BE FIXED UP TO CUT MEET OR WOOD. WHEELS ARE IN GOOD CONDITION, HAVE THE MOTOR FOR IT AND CHAIN DRIVE. CALL 914-213-2045

CENTURY WELDED (MIDDLETOWN ) $200

2009-11-05T19:23:36-05:00

CENTURY WELDER 200 AMP. IN NEW CONDITION. I ALSO HAVE WELDING RODS TO GO WITH IT. CALL 914-213-2045

Dewalt 14.4 Battery & Charger (Monroe, NY 10950) $25

2009-11-05T19:09:05-05:00

I am selling a 14.4 Dewalt DW9091 battery pack & charger. The battery is an extended life model. Bring your 14.4 drill & check it out. Sorry no pic

$25. cash & carry
.

.
email CL to get my phone #

2 5 gal of Sherman williams primmer (wappingers falls)

2009-11-05T18:55:37-05:00

A-100 sherman williams oil based primmer 100$ takes both of them its tinted a light gray great for exterior house painting, each was over 150$ call 914-539-0403 or email stayraising@hotmail.com

Radial Arm Saw (New Windsor, NY)

2009-11-05T18:08:36-05:00

Radial Arm Saw - Best offer - Call if interested - 845-913-5490

As you can see by the picture, it is bult into a cabinet/table

Craftsman 10 inch table saw (Washingtonville, NY )

2009-11-05T18:08:25-05:00

Craftsman 10 inch table saw - Best Offer!!!

Call if interested 845-913-5490

DUST COLLECTOR (JET)SUPER COND (ROCKLAND) $450

2009-11-05T17:57:24-05:00

JET DUST COLLECTOR,GOOD FOR WOOD SHOP AND VERY DUSTY AREAS, THIS UNIT WAS HARDLY USED AND IS IN NEW CONDITION. SCOTT 914-837-2955

NEW PICK UP TRUCK TOOL BOX (ROCKLAND) $100

2009-11-05T17:49:34-05:00

NEW DELTA BLACK PLASTIC TOOL BOX WITH KEYS AND MOUNT KIT/TRAY SCOTT 914-837-2955 ALSO HAVE ONE FOR MID SIZE PICK UP TOO!!

grader (Briscoe) $7000

2009-11-05T17:28:06-05:00

CUTS MFG., RSA design F96/0780 039-683-0693 grader in great shape.

For more pictures send a request.

$7000 or best offer.

snap on tool box (kingston ny) $6000

2009-11-05T17:16:03-05:00

large snap on tool box mint cond. going out of bisness paid 12000.00

30 HP TEMCo Rotary Phase Converter (Newburgh) $2000

2009-11-05T16:12:42-05:00

As per the side of the motor - Baldor, by the way:

Cat#: M2535T
Spec: 39L031X268H1
HP: 30
Volts: 230/460
Amps: 72/36
RPM: 1760
Frame: 286T
Hz: 60
PH: 3
SN: Z0605190239

Includes breaker boxes as supplied at original installation

13 foot vending Trailer (Kingston) $3000

2009-11-05T15:39:22-05:00

up for sale is a 13 foot single axle vending trailer . two side doors are 12 foot that opening up ward and the rear door is 5 foot which also opens up ward . Southern trailer no rust . new tires with new spare tire ,new wiring . Has shelfs which can easily removed . Great for fleamarkets , car shows , street fairs , hot dog wagon and much more. Selling for $3000.00 or BEST OFFER

if you can't give a reasonable offer than don't bother . BEST OFFER NOT FREE

Radial arm saw with DeWalt 10" saw (Kingston NY) $350

2009-11-05T14:08:25-05:00

Black & Decker radial arm saw with DeWalt 10" saw.

3'x4' table and stand included.

tool cart (new windsor) $450

2009-11-05T14:05:10-05:00

i have a matco tool cart with locking drawers and 2 small and 2 large locking drawers,paid $650.00 for it but i do not have the room for it anymore.it is blue with black trim and is in perfect condition.

trailer (new windsor) $3000

2009-11-05T13:49:39-05:00

i have a 18ft enclosed wells cargo trailer that was set up for welding,so it has bench in it,with a tool box,and the front of the trailer has another set of shelves set for storage.it also has a hanging cabinet in it,and a vise mounted on the bench.and you want it for welding it has a storage un it for gas bottles it hold 4 full size gas bottles.it also will come wirh a dot certified gas can.the rear door folds down,and it also has a side entrance door.it is already equipped with fire extinguishers,and a trailer tongue lock.

USED TOOLS 4 SALE (BLAUVELT) $200

2009-11-05T13:37:59-05:00

TOOLS FOR SALE. USED BUT WELL TAKEN CARE OF BY OWNER.
12" DUAL BEVEL COMPOUND MITER SAW - NON SLIDING!! DEWALT
7 1/4" DEWALT CIRCULAR SAW
BOSCH JIG SAW
PLEASE CALL BARBARA 845 359 5483 OR SEAN 305 632 0688

miller gas welder (new windsor) $8500

2009-11-05T13:26:54-05:00

miller trail blazer welder,tig box,mig box,and all leads,gas hose,regulators,and tanks of gas,tig rod for stainless steel,aluminum,steel,and for steel to stainless,plus all rods for the same for arc welding,and a cover for the machine.the weldr has about a 150hrs of running time,it is set to weld aluminum,stainless steel and steel it has been kept in a closed enviornment and comes with everything you need to start welding when you pick it up.i have approximately 200ft of welding cable,and 2 torch sets for the tig box.i will also give you a service kit for it for the filter change.you will also get about 300lbs of welding rod and wire for the tig,mig and arc wlding including hard facing rod and stainless steel rod.the machine was bought brand new by me from walter smith welding supplie out of kingston.it is in perfect condition,and it lays a awesome weld no matter what you are welding.

AS SEEN ON TV-PATIO DOOR CLOSER (T/Pok) $15

2009-11-05T13:15:59-05:00

For sale is a "glide-along" automatic sliding patio door closure. It is in the original box and never used....I have a pic of the box if you want to see it but the link below will give you a better idea of the item and its intent. Thanks. $15 OBO.

http://www.asseenontvandmore.com/bautsliddoor.html

COAT LOCKER / STORAGE (POK DUTCHESS CO) $85

2009-11-05T12:43:49-05:00

6 AVAL/
SUPER CLEAN COAT LOCKERS...
GREAT FOR STORAGE...
21" DEEP 18" WIDE 78" HIGH
GRAY COLOR
TAKE THEM ALL FOR $85 EACH.
SEE THEM IN THE BACKGROUND RT SIDE....

AIR FILTERING UNIT! 1/2 PRICE (DUTCHESS CO POK) $395

2009-11-05T12:18:33-05:00

4 AVAL
THESE ARE PRICED OUT AT ALMOST $1000 EACH NEW... LESS THEN HALF PRICE FOR ANY SHOP, GARAGE, ETC
REMOVES DUST AND DIRT IN THE AIR...
CALL FOR ALL INFO AND PICS...
NEVER CHANGE FILTERS JUST WASH THEM OUT WHEN DIRTY / DRY AND RE INSTALL
845 656 2510
POUGHKEEPSIE AREA

LA-2000S Electronic Air Cleaner

This heavy duty air cleaner combines an impressive cleaning capacity with an air filtering system that traps up to 97% of all airborne particles (even those as small as one-millionth of an inch) for a cleaner, healthier home or office. Like the LA-1400 series, this unit can be mounted either with provided eyebolts and chain for ceiling installation or with the optional mounting bracket (#10009). The LA-2000S also features a new electronic filter cell this is lighter in weight, making it easier to remove for cleaning and, the dual cell design does not require special alignment to re-install. Click here for more information on How It Works.

Two speed fan provides 1,500 cfm (cubic feet per minute) on low speed, 2,100 cfm of clean air on high speed.

LA-2000 will clean an area up to 1,500 square feet. Please see "Determining the Model and Quantity of Air Cleaners for Your Application".

Carbon after filter (included) removes odors from the purified air and lasts 3 to 4 months.

7 Year Limited Warranty!

Cabinets available in wood grain, black and white

THESE ARE THE WOOD GRAIN CABINETS

Specifications Capacity 1,500 - 2,100 cfm
Dimensions 21.5 x 27 x 21.5"

Cell Collection Area APROX 15,000
Unit Weight 79 lb. OR LESS

Power Usage 720 watts
Power 120v, AC/60Hz/5 amps
230v, AC/50Hz/3 amps (60 Hz available)
Sound Level 42 - 53 dB (A)
Particle Removal As small as 0.01 micron

door for a cat 304 (pine bush)

2009-11-05T11:15:51-05:00

hello i have a door for a cat 304 make me a offer

v43 esco teeth (pine bush) $675

2009-11-05T11:13:48-05:00

hello i have 6 v43 esco teeth brand new let me know if you want them

3 BOXES BOSTITCH NAIL GUN NAILS 2" - 51mm (CORNWALL) $25

2009-11-05T10:58:36-05:00

I HAVE 3 BOXES BOSTITCH NAIL GUN NAILS 2" - 51mm -15 GAUGE CHISAL POINT ANGLED FINISH NAILS.....2 BOXES LOOK FULL AND ONE BOX IS APPOX 1/3 TO 1/2 FULL...THESE WERE EXTREAMLY EXPENSIVE...BOX SAYS QUANITY PER BOX IS 3655...PLEASE CONTACT ME AT CHATTYLYN@AOL.COM

BIG BOX 2 1/2" 63mm BOSTITCH FRAMING NAILS FOR NAIL GUN (CORNWALL) $20

2009-11-05T10:56:04-05:00

I HAVE A BIG BOX OF 2 1/2" 63mm BOSTITCH FRAMING NAILS FOR NAIL GUN...........FULL BOX.........THESE WERE VERY VERY EXPENSIVE...I HAVE ALSO LISTED ANOTHER POST WITH 3 BOXES....... CONTACT ME AT CHATTYLYN@AOL.COM

snow blowers 4 (monroe) $25

2009-11-05T10:15:08-05:00

4 blowers all different sizes all will run with min tinkering. 3 are very good cond . but need minor work 1 is antique sidewalk blower want 60.00 for that one . calls only no pic and no bull please will make package for ? 845 783 7217

Stanley Sawhorses (Wappinger Falls) $35

2009-11-05T10:06:17-05:00

Stanley Adjustable Sawhorse -- Twin Pack

oxegen +acetyline tanks (monroe) $160

2009-11-05T10:05:58-05:00

large acetyline tank full one large oxegen tank empty both in good cond. + privetly owned + filled locally. 845 783 7217

RYOBI 10' Table Saw (Wappinger Falls) $75

2009-11-05T09:53:46-05:00

Adjustable T-slot miter gauge allows for wide crosscut operation
16 inch x 25-3/4 inch table provides support for large ripping operations
Lighter weight design for easy transport
Transparent blade guard with integral anti-kickback pawls
Rip Fence provides material guide for large ripping operations
Hand wheel for precise blade height adjustment
Motor: 120V~ 60 HZ, 13 Amp
Blade Diameter: 10 inch
Arbor: 5/8 inch
Speed: 4,800 r/min (RPM)

Capacities
Max. depth of cut at 90�: 3 in.
Max. depth of cut at 45�: 2-5/8 in.
Max. rip to right of blade: 9-1/2 in.
Table Size
Top: 16 in. x 25-3/4 in.
Miter Slot: 5/8 in.

Overall Dimensions
Height: 14-3/4 in.
Width: 25-3/4 in.
Depth: 23-1/2 in.
Weight: 45 lbs. with stand

posting descriptions are approximate for reference

Mechanic's Padded Steel Creeper (Wappinger Falls) $35

2009-11-05T09:44:13-05:00

TOOL STUD CREEPER WITH 5-POSITION ADJUSTABLE HEADREST ;
Approximately 17"W x 40"L. 2-1/2"

USED HUSQVARNA CHAINSAW (Dutchess or Westchester County)

2009-11-05T09:08:03-05:00

USED HUSQVARNA CHAINSAW, Decent Condition Run Great!
Model: 350 52CC, 16 in Bar

Comes with case, New bar, and New Chain!

Make me an offer. CASH ONLY. Thanks

Call Me.
(845)661-8979